Notes
Do not display a still picture for a long time
This causes the image to remain on the plasma screen
("Image retention"). This is not considered a malfunction and is not covered by the warranty.
4 : 3
Typical still images
•
Channel number and other logos
•
Image displayed in 4:3 mode
•
•
SD Card photo
Video game
Accessories/Optional Accessory
Check you have all the items shown. (Accessories)
Remote Control
Transmitter
N2QAYB000321
Pedestal
TBLX0088
(TC-42PS14)
TBLX0089
(TC-50PS14)
Optional Accessory
Wall-hanging bracket
(angle)
TY-WK4P1RW (for 42"/50")
TY-WK5P1RW (for 54")
Hook
12
•
Computer image
Accessories
Batteries for the
Remote Control
Transmitter (2)
AA Battery
TBLX0102
(TC-54PS14)
Note
In order to maintain the TV's performance and safety, be absolutely sure
to ask your dealer or a licensed contractor to secure the wall-hanging
brackets.
Carefully read the instructions accompanying the plasma TV stand or
pedestal, and be absolutely sure to take steps to prevent the TV from
tipping over.
Handle the TV carefully during installation since subjecting it to impact
or other forces may cause its panel to crack.
Installing the remote's batteries
Open
Note the correct polarity
(+ or -).
To prevent "Image retention", the screen saver is
automatically activated after a few minutes if no signals are
sent or no operations are performed.
■
Set up
Do not place the unit where it's exposed to sunlight or
other bright light (including reflections).
Use of some types of fluorescent lighting may reduce the
remote control's transmission range.
Cleaning cloth
Operating Instructions
Quick Setup Guide
Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)
Caution
Incorrect installation may cause
Close
battery leakage and corrosion,
resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or break batteries.
AC cord
5