Assembling The Pedestal - Panasonic Viera TC-50PX34 Owner's Manual

■

Assembling the pedestal

Fix securely with assembly screws
Tighten screws firmly.
Pole
R
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
B
Arrow
mark
Pole
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
8
Attaching the pedestal to TV
A
(Total 4 screws).
A
L
Pole
Front
Base
Bottom view
Rear side
Hole for pedestal
installation
Pole
Fix securely with assembly
screws
Base
B
(Total 4 screws).
Accessories
Assembly screws
(4 of each)
A
XYN5+F18FN
size (M5 × 18) (Silver)
B
THEL080N
size (M5 × 30) (Black)
Poles (2)
L
R
L R
or is printed at the
bottom of the poles.
Base (1)