Canon EOS-3 Instructions Manual page 86

Switching the Film Advance Mode
When
If the battery power drops in cold temperatures or the film advance
operation is slow, it means that the camera is trying to provide film
advance power rather than speed. This feature is called automatic film
advance transmission. If this is activated, one of the film advance icons
( , ,
when you press the <
when you replace the film or battery. If this feature is activated, check the
battery power (see page 22) and follow the respective countermeasures.
• If film advance or rewind stops midway,
replaced with a new one, film advance will resume. To resume film rewind, press the midroll
rewind button.
• In cold temperatures, warm the battery in your pocket, etc., to enable use.
Continuous Shooting Rates
Configuration
EOS 3
EOS 3 + BP-E1
EOS 3 + PB-E2
EOS-3 + Power
Drive Booster E1
No viewfinder information is displayed during continuous shooting.
86
, , , or
, ) will blink on the LCD panel. This feature is canceled
Power Source
2CR5 lithium battery
Size-AA alkaline batteries × 4
Nickel Hydride Pack NP-E2
Size-AA alkaline batteries × 8
Size-AA alkaline batteries × 8
Blinks
> button and <
will blink on the LCD panel. When the battery is
Film
Advance
Mode
> button simultaneously or
(approx. frames/sec.)
One-Shot AF /
Manual Focus
4.3
7
3
6
3
6
3
AI Servo AF
3.3
7
3
5
3
5
3