Canon EOS-3 Instructions Manual page 129

Problem
The film has not been loaded
properly. (<
the LCD panel.)
Rewound film is still in the
The shutter
camera. (The <
does not
blinking.)
release.
Focus has not been
achieved. (The in-focus
indicator in the viewfinder is
blinking.)
The temperature is cold.
The film does
not rewind
automatically.
Custom Function CF-1 has
been set to 1 or 3.
Battery power is very low.
A misoperation has occurred
with the camera, lens, or
flash unit.
" " blinks on
the LCD panel.
Probable Cause
> blinks on
> icon is
Troubleshooting Guide
Solution
Load the film correctly.
Replace the film with a new roll.
Press the shutter button halfway
again and focus again. If the
camera still cannot focus, see
"Manual Focusing " on page 52.
Cold temperatures can quickly
degrade battery performance.
Replace with a new battery.
Set Custom Function CF-1 to 0 or
2.
Replace the battery with a new
one.
Remove and reload the battery. If
" " turns off, camera operation
will be normal.
• If " " still continues to blink,
the camera, lens, or flash unit is
faulty. Take the camera and any
attached lens and flash unit to
your nearest Canon Service
Center.
Page
24
25
24
28
17
30
52
8
21
28
104
7
21
7
21
Back
cover
129