Canon EOS-3 Instructions Manual page 40

Focusing Point Selection
When the <
be turned to select a focusing point toward the top or bottom.
The focusing point selection method can be altered with the Custom Function
CF
CF-11. See page 116.
Custom Function CF-10 can prevent or limit the lighting up of the focusing point.
CF
See page 114.
Before you can accurately select a focusing point with Eye Control, calibration will be
required. For details, see "Eye-Control Calibration" on page 42 and "Eye-Control
One-Shot AF" on page 47.
40
> button is pressed while the < > is pressed, the <
The focusing point selection takes
4
effect after 6 seconds or when the
shutter button is pressed halfway.
Eye-Control Focusing
Point Selection
Set the <
1
2 Look at the subject covered by the
area AF ellipse and press the
shutter button halfway.
• The selected focusing point will light and
achieve focus.
> dial can
> switch to < >.