Depth-Of-Field Ae With Eye-Selected Focusing Points - Canon EOS-3 Instructions Manual

Depth-of-field AE (DEP): You Set the Depth of Field
Depth-of-field AE with a Camera-Selected Focusing Point
• The camera selects the center focusing point for depth-of-field AE. Follow the
same procedure as for "Depth-of-field AE with a Manually-Selected Focusing
Point" while using the center focusing point to set the DEP points.
• Be sure to complete each step within 6 seconds (before the viewfinder display
turns off) after removing your finger from the shutter button. Otherwise, the DEP
settings will be canceled and you will have to start over.

Depth-of-field AE with Eye-Selected Focusing Points

With Eye Control, you can set the DEP points by looking at the focusing
point. This is the easiest way.
70
8 Press the shutter button completely
to take the picture.
Set the <
1
• Make sure the correct CAL No. has been
set. See page 42.
2
While pressing the <
button, turn the <
DEP appears on the LCD panel.
Release the <
3
> to < >.
> dial until
> button.
>