Saving Function Key Settings To A Memory Card; Replaying Function Key Settings From A Memory Card - Furuno CSH-23F Operator's Manual

Fine
Adjustment
Item
TVG Near
TVG Mid
TVG Far
Tx Cycle
Tx Beamwidth
Tx Power

Saving Function Key Settings to a Memory Card

Replaying Function Key Settings from a Memory Card

Function Key Fine Tuning
-4 -3 -2 -1
-3 -2 -1 0
-3 -2 -1 0
-3 -2 -1 0
0 0 0 0
-3 -2 -1 0
-2 -1 0 0
1. Press the MENU key.
2. Select the CARD UTILITY menu.
CARD UTILITY
List
Save
Delete
Initialize
Figure 6-2 CARD UTILITY menu
3. Select Save and press the MENU key.
Note: If the card has not been initialized, initialize the card by
selecting Initialize and then save.
Press the CARD REPLAY key on sub panel 1.
Note: When function key settings are replayed from a memory
card, current settings on all function keys are erased. Therefore,
if necessary, save current function key settings to another memory
card before replaying.
0 1 2
0 1 1
0 0 1
0 0 0
0 0 0
0 0 0
0 0 0
Press END key to return to main menu.
Execute
Execute
Execute
Execute
3 4 5
2 3 4
1 2 3
1 1 2
0 0 0
0 0 0
0 0 0
6-3