5-14 Using Fan-Fold Paper
• Supplying paper to the printer externally is done as follows.
5-14-1 Printer Preparation
Remove the rear paper supply cover on the back side of the printer with a knife or other
cutting instrument.
Remove
Take care not to injure the hands and/or any other part of the body
Caution
when performing this step.
5-14-2 When Using Pan-Fold Paper
1) Insert the paper at the rear of the printer using the slot and guides.
2) Adjust the holder and guides to the width of the paper.
Holder
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
V10 CONSUMIBLES S.L.
Paper Holder