Stand-Alone Configuration Mode; How To Start Stand-Alone Configuration Mode; List Of Supported Functions - BIXOLON SLP-TX403 User Manual

5-2 Stand-alone Configuration Mode

• Various modes can be executed using buttons and LED only.

5-2-1 How to start stand-alone configuration mode

1) The printer mode is set to Printer Setting Mode when the Pause button is pressed
for two seconds while in Print Standby Mode.
2) Both LEDs will change to orange color and the printer will be set to Stand-alone
Configuration Mode.
3) When the printer enters into this mode, the status of LED 1 and LED 2 are changed
sequentially.
4) When the Feed button is pressed at specific LED color combination, the
corresponding printer operation will be selected.

5-2-2 List of supported functions

LED 1
Sequence
number Color
1
2 Green
3
4
5 Orange
6
7
8 Red
9
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
LED 2
Status Color
Green Blink four times
On Orange Blink four times
Red Blink four times
Green Blink four times
On Orange Blink four times
Red Blink four times
Green Blink four times
On Orange Blink four times
Red Blink four times
V10 CONSUMIBLES S.L.
Printer operation
Status
Print Configuration Info.
Print File List
Factory Reset
Gap Sensor Auto Calibration
B/M Sensor Auto Calibration
Data Dump Mode
-
-
-