3-3 Paper Installation
1) Open the Paper Cover.
3) Open the Ribbon Assembly and spread
the paper guide.
5) After Installation the paper, manually set the sensor(Gap & Black-Mark) and Paper
Guide to the correct position.
6) Close the Ribbon Assembly until a click sound is heard, close the Paper Cover.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
2) Spread the paper holder and insert
paper as shown.
4) Feed the paper between the Paper
Guide on both sides.
Ribbon Assembly
●
●
Moveable Black-Mark Sensor
and Notch Sensor
V10 CONSUMIBLES S.L.
Paper Guide
●
Moveable(half)
Gap Sensor