Using The Rangetop - Smeg C30GGXU1 Manual

5. USING THE RANGETOP

WARNING
NOTE: Check that the burner heads, burner caps and grates are correctly positioned. Before lighting the
rangetop burners, check that each burner head is correctly positioned with its respective burner cap.
Align slot A with the igniter and ensure that the pins B line up with slots C. Align the flarings D of the
burner cap to the pins B and when positioned on the burner, rotate the burner cap slightly to ensure that
it is stable.
For the dual burner, place the burner cap G and F on the burner head E, ensuring that they fit snug. The
burner head must be put on (taking care to use the spark electrode as a guide).
5.1 Ignition safety device
Each burner knob has a marking corresponding to the burner it controls (the example at the left, shows
the front left burner).
The appliance is equipped with spark electrode ignition.
- Just turn the knob counterclockwise to the simmer flame symbol
NOTE: If the flame accidentally goes out, an automatic system will attempt to relight it. If the attempt to
relight it is unsuccessful, an internal safety device will block the flow of gas. To restore the correct
operation of the lighting system, return the knob to the position
REMEMBER: When the rangetop is in use, the entire range area may become
NOTE: Do not try to manually relight the flame.
12
Instructions for the user
FIRE HAZARD
- Do not allow the burner flame to extend beyond the
edge of the pan.
- Turn off all controls when the range is not in use.
until the burner turns on.
and repeat the procedure.
hot.