Connecting A Number Of Cameras (Using A Camera Control Unit) - Sony DXC-D35H/D35PH Operating Instructions Manual

VTR selector settings on the CA-537/537P
Connected VTR VTR
selector
switch
setting
Sony broadcast and 1
professional VTRs:
BVU-150/150P, VO-
6800/6800PS a) , BVW-
50/50P and BVV-5/
5PS b)
Sony professional 3
VTRs: VO-8800/
8800P and EVV-9000/
9000P
Panasonic AG-6400 2
VHS VTR
Panasonic AG-7400 S- 3
VHS VTR c) and JVC
BR-S405 S-VHS VTR
a) Set the audio input level on the VO-6800/6800PS to –60
dB.
b) When the BVV-5/5PS is used as a portable VTR, a VA-
5/5P VTR Composite/Component Adaptor is required.
c) Set the input selector switch on the AG-7400 to Y/C.

Connecting a Number of Cameras (Using a Camera Control Unit)

When using a number of cameras in the studio, it may
be necessary to use a CCU-M5/M5P/M7/M7P Camera
Control Unit to provide video and color sync between
cameras, and special effects and other devices to allow
switching, wipes and so forth.
In the studio it may also be convenient to use a DXF-
41/51 Viewfinder.
Video output Audio
signal output
signal
level
Composite –60 dB
(BVU-150/
150P and VO-
6800/6800PS)
or component
(BVW-50/50P
and BVV-5/
5PS)
Y/C –60 dB
Composite –20 dB
Y/C –20 dB
VTR selector settings on the CA-327/327P
Connected VTR VTR
selector
switch
setting
Sony broadcast and 1
professional VTRs:
BVU-150/150P and
a)
VO-6800/6800PS
Sony professional 3
VTRs: VO-8800/8800P
and EVV-9000/9000P
Panasonic AG-6400 2
VHS VTR
Panasonic AG-7400 S- 4
b)
VHS VTR
a) Set the audio input level on the VO-6800/6800PS to –60
dB.
b) Set the input selector switch on the AG-7400 to Y/C.
The figure in the next page shows an example studio
configuration.
For details, consult your Sony dealer.
Notes
• When using a camera control unit, put the camera
head into the EZ mode off state beforehand (see page
14). (Otherwise, it is impossible to access the
advanced menu.)
• With the DXC-D35/D35P/D35WSL/D35WSPL,
color matrix switching on the CCU-M5/M5P is
invalid.
• When the DL in advanced menu page 2 is set to ON
(see page 64) and the OUTPUT/DL/DCC+ switch is
set to DL, knee adjustment does not function on the
CCU-M7/M7P.
Chapter 2 Fitting and Connections
Video output Audio
signal output
signal
level
Composite –60 dB
Y/C –60 dB
Composite –20 dB
Y/C –20 dB
37