Using The Camcorder Grip - Sony DXC-D35H/D35PH Operating Instructions Manual

Using the Camcorder Grip

When using the camera head with a VTR as a
camcorder, you can replace the camera head's grip
with a camcorder grip (not supplied). The type of
Attaching a camcorder grip to the DSR-1/1P
1
If the viewfinder is attached,
adjust the viewfinder to the
full-forward position.
For details, see "Adjusting the
viewfinder position" on page 32.
2
Remove the camera head
grip's three screws, then pull
up the grip to remove it.
3
Remove the VTR connection
plate.
4
Remove the DSR-1/1P's
shoulder strap fitting and the
camera head connection plate.
camcorder grip and the method for attaching it differ
slightly depending on the type of VTR.
Camera head
connection plate
Shoulder strap
fitting
VTR connection
plate
(continued)
Chapter 2 Fitting and Connections
27