Hotpads - Fujitsu Stylistic 3500 User Manual

HDD • On State (or
flashing)
Access
• Idle Mode
• Suspend-to-RAM
• Save-to-Disk
• Off State
Hovering • On State
(Hovering enabled)
• On State
(Hovering disabled)
• Suspend-to-RAM
• Save-to-Disk
• Off State

Hotpads

Hotpads are stylus-active areas below the system display that you can use to adjust
the settings of the display and speaker settings while the system is running. Separate
hotpads are available for enabling the right mouse button function and the pen
hovering mode.
To use a hotpad, tap directly on it with the stylus. You can also press and hold the
stylus tip against the Volume and Brightness hotpads to automatically repeat the
hotpad function. The location of each hotpad is shown in Figure 1-4.
Programmable Speaker
Icon On/Off
Volume
Down
Table 1-1 System Status Indicators
Green
Off
Green
Off
Off
Display
Select
Volume
Up
Figure 1-4 Hotpads
Displayed when hard disk drive is
accessed.
Hard disk drive is not being
accessed.
Hovering mode is enabled
Hovering mode is disabled.
Mouse
Brightness
(8 levels)
Hotpads
1
Right
Pen
Hovering
9