Fujitsu Stylistic 3500 User Manual page 18

Connector/
Pen Tablet Icon
Peripheral
IrDA/FIR port
Modem
High-Usage
Metal Contacts
System
†
interface port
Infrared
keyboard port
TM
Kensington
Lock slot
†
Open the connector door to access these connectors.
12 Getting Started
Table 1-2 Peripheral Connectors/Interfaces
An infrared transceiver built into the pen tablet allows you
to communicate with other devices that are compliant with
the IrDA Standard Rev. 1.1. Effective range for infrared
communication is about 3 feet, and within 15 degrees off of
center. A clear line-of-sight path must exist between the
IrDA port on the pen tablet and the IrDA transceiver on the
other device.
Connect a telephone line to the optional internal modem
using a standard RJ-11 telephone plug.
Install the pen tablet in an approved docking device. The
contacts provide DC input and USB interface.
Connect the Stylistic 3500 port replicator or other approved
docking device. Refer to the documentation accompanying
the docking device for more information.
An infrared receiver built into the pen tablet allows you to
communicate with a wireless infrared keyboard. The
keyboard infrared port works optimally between 10 to 30
cm (approximately 4 in. to 12 in.) from the keyboard
infrared port, located on the bottom edge of the pen tablet.
Ensure that there is a clear line-of-sight path between the
infrared receiver on the pen tablet and the infrared
transmitter on the keyboard.
The Kensington Microsaver
secure the pen tablet using Kensington-compatible locking
devices.
Purpose
TM
security slot allows you to