Replacing The Stylus - Fujitsu Stylistic 3500 User Manual

To Calibrate the Stylus
1. Open the Control Panel from the Start|Settings menu, and double-tap the Pen
Configuration icon. Select the Calibration property sheet, then click on Pen
Calibration.
2. Position the Stylistic 3500 pen tablet as you normally would during use. Be sure to
hold the stylus at the angle that you regularly use. Touch the screen only with the
stylus tip; inadvertently touching the screen with your finger or hand during the
calibration process, may result in faulty calibration.
3. Perform the calibration steps according to the instructions on the screen. The
calibration utility displays a cross-hair symbol in the middle and corners of the
screen, one corner at a time. Hold the stylus as you normally would while using
the system and, as accurately as possible, tap the center of each crosshair as it is
displayed.
A dialog box is displayed after you tap the last of the four cross-hair symbols. Tap
the screen within 20 seconds if you wish to save your new calibration settings. If
you don't tap the screen within 20 seconds, the default calibration settings will be
used.
4. When the Verify New Pen Calibration Settings window appears, choose one of
the following steps.
• If you are satisfied that you tapped the cross-hairs accurately, tap Yes. The
taps that you performed in step 3 are then used to calibrate the screen.
• If you do not want to use the new calibration, tap No.
• If you want to enter a new calibration, tap Recalibrate. The calibration
instructions reappear.
If you have successfully performed the procedure above, the stylus is now
recalibrated, and you can use the system as you normally would.

Replacing the Stylus

With use, the stylus tip may become worn or may pick up foreign particles that can
scratch the screen. A damaged or worn tip may not move freely, causing
unpredictable results when using the stylus. If your stylus exhibits these problems,
contact your reseller to purchase replacements.
22 Using the Stylistic 3500 Pen Tablet
2
2