Locking The Flash Exposure Setting (Fe Lock) - Canon PowerShot A710 IS Advanced User's Manual

3
Press and hold the shutter button halfway
and press the
The icon will display.
4
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the AE Lock
Press a button other than the
You can use the FE lock when using the flash (p. 49).
Locking the Flash Exposure Setting
(FE Lock)
Shooting Mode
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
1
Turn on the LCD monitor.
2
Press the
3
Focus on the part of the subject on which
you wish to lock the flash exposure setting.
4
Press and hold the shutter button halfway
and press the
The flash will pre-fire and
5
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the FE Lock
Press a button other than the
The FE lock function is not available when [Flash Adjust] is
set to [Manual] (p. 63)
button.
or
button and set it to
button.
will display.
or
button.
(flash on).
button.
49