Adjusting The Tone (White Balance) - Canon PowerShot A710 IS Advanced User's Manual

2
Press the
exposure compensation bar is displayed.
Use the
exposure compensation and press the
button.
Depending on the shooting mode,
pressing the
between the setting items as follows:
* The AF frame can only be selected when [AF frame] is set to
[FlexiZone] (p. 44)
To Cancel the Exposure Compensation
Follow procedure 2 to restore the compensation value to [0].

Adjusting the Tone (White Balance)

Shooting Mode
Normally, the
white balance. When the
looking colors, change the white balance using a setting
appropriate for the light source.
1
FUNC. Menu
* Default setting.
Use the
white balance setting and press the
FUNC./SET button.
52
button several times until the
or buttons to adjust the
button will switch
mode/Exposure compensation
Shooting direction selection/Exposure compensation
Shutter speed/Exposure compensation/AF frame*
Aperture value/Exposure compensation/AF frame*
Exposure compensation/AF frame*
(Auto) white balance setting selects an optimal
(Auto) setting cannot produce natural
* (Auto).
See Menus and Settings (p. 18).
or button to select a
* Cannot be set in
*
and modes.