Canon PowerShot A710 IS Advanced User's Manual page 62

3
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the
Only one color can be specified.
You can use the
colors that are swapped.
–5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the
Only one color can be specified.
5
Press
shoot.
The default setting for color swap mode will change green
into white.
You may not obtain the expected results if you use the flash.
The colors specified in the color swap mode are retained
even if the camera's power is turned off.
60
button.
or button to specify the range of
button.
to complete the setting, then