Power Saving Function - Canon PowerShot A710 IS Advanced User's Manual

Power Saving Function

This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.
Shooting Mode
Playback Mode
Connected to a Printer
* This time can be changed.
The power saving function will not activate during an Auto
Play or while the camera is connected to a computer.
The power saving function settings can be changed (p. 22).
Powers down approximately 3 minutes after
the last control is accessed on the camera.
The LCD monitor automatically turns off 1
minute* after the last control is accessed
even if [Auto Power Down] is set to [Off].
Press any button other than the power button
or change the camera orientation to turn the
LCD monitor back on.
Powers down approximately 5 minutes after
the last control is accessed on the camera.
17