Removing A Memory Stick/Sd/Xd Card - Fujitsu Lifebook N6210 User Manual

N6210.book Page 41 Wednesday, May 18, 2005 10:24 AM
When installing a Memory Stick, SD, or xD
card in the slot, be sure the card label is
facing downward. When installed, a
Memory Stick will extend approximately
half an inch from the edge of the
notebook chassis.
1. See your Memory Stick, SD Card, or xD Card
manual for instructions on the installation of your
card. Memory Stick Duo Cards require an adapter.
2. Make sure there is no card currently in the slot. If
there is, see Removing a Memory Stick/SD/xD Card.
3. Install the card in an adapter, if required.
4. Insert your card into the slot with the product label
facing down.
5. Push the card firmly into the slot until it is seated in
the connector. Memory Sticks will extend from the
slot approximately half an inch when installed.

REMOVING A MEMORY STICK/SD/XD CARD

To remove a Memory Stick, SD Card, or xD Card, follow
these easy steps:
See your card manual for specific
instructions on the removal of your card.
Some cards may require your LifeBook
notebook to be in Suspend Mode or Off
while removing them.
Push the Memory Stick, SD Card, or xD Card adapter in
until it unlatches. It will then eject from the slot for
removal.
U s e r - I n s t a l l a b l e F e a t u r e s
41