Table of Contents
Advertisement
N6210.book Page 107 Wednesday, May 18, 2005 10:24 AM
Adjusting the Volume
1.
Use the [Vol +] and [Vol -] buttons on the remote
control to increase and decrease the volume. Note
that when changing the volume, the screen display
may temporarily stop.
2.
Adjust the volume to a comfortable level. Do not
raise the volume to the point that the sound is dis-
torted. Doing so could damage the speakers.
Muting the Volume
1.
To mute the sound completely, press the [Mute]
button on the remote control.
2.
To un-mute the volume, press the [Mute] button
again.
Changing Audio Mode
Audio mode is selected when sound multiplex broad-
casting (such as bilingual broadcasts) is received through
the TV input.
Press the [Audio] button on the remote control to select
the audio mode you want. Each time the button is
pressed, the audio will toggle between Mono-SAP,
Mono-Main, and Stereo.
Watching Video from External Devices
1.
Press the [TV/Video] button on the remote control.
Each time the button is pressed, the input signals
will cycle from TV -> S-Video -> Composite Video.
Select the input type corresponding to the input
port that is connected to the external device.
2.
For instructions on operating the external device,
refer to the manufacturer's user guide.
• The screen image may blink when play-
ing videos on fast forward or fast reverse.
• The screen image may be distorted,
depending upon the external device
being used (e.g., video tapes, laserdiscs.)
COPYING FROM AN EXTERNAL DEVICE
TO DVD
To copy video from an external device, such as a VCR or
DVD player, perform the following steps:
Be aware that many videotapes and DVD
discs are copy-protected to prevent
duplication. Attempting to copy such media
will be unsuccessful.
1.
Connect the external device in accordance with
"Connecting the TV tuner" on page 103.
2.
Start Instant MyMedia by pressing the TV button
on the remote control.
T V T u n e r U s e r ' s G u i d e
3.
Insert a blank DVD-RAM disc in the notebook
media player.
4.
Press the TV/Video button on the remote control
and select Composite or S-Video, depending upon
which type of cable is connected to the external
device. (See "Connecting the TV tuner" on
page 103).
5.
Insert the tape or disc in the external device and
start playing it.
6.
Press the [REC] button on the remote control. If it
is not copy-protected, the program being viewed
will be copied to the DVD-RAM in the notebook.
RECORDING TV PROGRAMS TO HDD
To record a TV program to your hard disk drive:
1.
Push the Menu button in TV mode. The TV Set-
tings menu will appear.
2.
Using the cursor button, move the cursor to the
bottom, then press the cursor button again.
"Record Media" will appear.
107
Advertisement
Table of Contents
Troubleshooting
