Fujitsu Lifebook N6210 User Manual page 118

N6210.book Page 112 Wednesday, May 18, 2005 10:24 AM
L i f e B o o k N S e r i e s U s e r ' s G u i d e
• Changing the screen setting
Adjusting the brightness, colors, and contrast of the
screen, setting an off-timer, and changing screen types
can be performed. See "Adjusting the display quality" on
page 113.
Using the DVD menu
Some discs may have special menus. With such DVDs,
the disc can be operated by reading its special menu
from the menu screen.
Some DVDs may automatically display the title menu
when set, but there may be some cases which are not
operated by the remote controller even if the title menu
is displayed. In this case, read the title menu from the
menu screen by following the steps below.
1. Press the [Menu] button and select Menu from the
screen.
2. Select "Root menu" or "Title menu" and press the
[Enter] button. The menu screen unique to the disc
is displayed.
Playing the TV programs or videos recorded
on a DVD
Playing TV programs recorded by Instant MyMedia
DVDs on which TV programs were recorded in Instant
MyMedia, can be played in the DVD/CD mode in the
same way as commercially available DVDs. See "Playing
DVDs" on page 110.
Playing TV programs or videos recorded on other
DVD recorders
DVDs recorded in a DVD video format can be played.
See"Playing DVDs" on page 110.
DVD discs on which digital broadcasts are
recorded cannot be played.
Changing the play settings for DVDs
The status of DVDs to play may be
determined by the intention of software
designers. In that case, functions may not
work as operated, because Instant
MyMedia is played according to the
contents of the disc which the software
designer intended. Refer to the instruction
manual for the DVD to be played.
Changing the region code
Each playable region code is set to each DVD, so it
cannot be played if this code is not matched with the
region code of playing devices.
112
If you want to play DVDs with different region codes,
the region code of Instant MyMedia can be changed.
• The change to the region code can be
made up to 4 times including changes to
"WinDVD" and "WinDVR" on the note-
book. When changes to the region code
are made 4 times, the code is fixed to the
last one, disabling DVDs having other
region codes to be played. Note that
there is no way to change the fixed
region code.
• Region codes can't be changed while
playing DVDs. Press [Stop/Eject] first.
1. Press the [Menu] button to display the menu.
2. Confirm the current region code. The item with a
"O" attached on the left side is the region code that
is currently set.
3. Select a new region and press the [Enter] button.
Only the DVDs having the region code newly set
can be played.
Setting the play start position
Set the position for starting the play of DVDs.
1. Press the [Menu] button to display the menu and
select Auto Resume from the list.
2. In the right column, select the setting you would
like and press the [Enter] button.
Start from the beginning: Play from the start of the
disc regardless of the position where it was previ-
ously stopped.
Start from last position: Play from the position
where the disc was previously stopped.
The change to the setting of auto resume
becomes effective after the notebook has
been powered off.
Changing a language used in audio and captions
Audio and captions can be selected from multiple
languages depending on the DVD. To change a language
for audio/captions during the play, use the [Audio]
button on the remote control.
1. Press the [Menu] button to display the menu and
select Audio Language or Subtitle Language from
the list. The language for audio can be changed if
the "Audio Language" is selected, and the language
for captions can be changed if the "Subtitle Lan-
guage" is selected.