Locking the Flash Exposure Setting
(FE Lock)
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
1
Turn on the LCD monitor.
2
Press the
3
Focus on the part of the subject on which
you wish to lock the flash exposure setting.
4
Press and hold the shutter button halfway
and press the
The flash will pre-fire and
5
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the FE Lock
Operate a button other than the
The FE lock function is not available when [Flash Adjust] is
set to [Manual]
Shooting Mode
button and set it to
button.
or
(p.
66).
will display.
button.
(flash on).
51