Manually Setting The Shutter Speed And Aperture - Canon Powershot A620 User Manual

Manually Setting the Shutter Speed
and Aperture
You can manually set the shutter speed and aperture to shoot
images.
When you press the shutter button halfway, the difference
between the standard exposure* and the selected exposure
appears on the LCD monitor. If the difference is more than ±2
stops, "–2" or "+2" appears in red.
* Standard exposure levels are calculated by measuring light according to
the currently selected metering mode.
If you wish to change the exposure, select shutter speed or
aperture using the
the
If the zoom is adjusted after these values are set, the
aperture value may change in accordance with the zoom
position.
The LCD monitor's brightness matches the selected shutter
speed and aperture value.
When you select a fast shutter speed or shoot a subject in a
dark place, the image will always be bright if the flash is set
to
on).
For the correlation between aperture value and shutter
speed, see page 42.
44
button, then adjust the value using
or button.
(Flash on, with red-eye reduction) or
Shooting Mode
(Flash