Output/Input Set - JVC HR-XVS30E Instructions Manual

56
EN

Output/Input Set

● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
L-1 Output Setting (L-1 OUTPUT)
Set "L-1 OUTPUT" to the appropriate mode depending on the
type of appliance connected to the unit's L-1 IN/OUT connector.
A
Select the S-VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
B
Access the Main Menu screen.
Press SET UP MENU.
C
Access the Output/Input Set screen.
Press rt to move the
highlight bar (pointer) to
"OUTPUT/INPUT SET", then
press OK or e.
EDITING (S-VHS DECK) (cont.)
D
Select the output mode for the L-1 IN/OUT
connector.
Press rt to move the
highlight bar (pointer) to "L-1
OUTPUT". Then, press OK
or e to select the appropriate
setting.
* The default setting is bold in
the table below.
8 L-1 OUTPUT
VIDEO: If a connected appliance's input is
compatible only with regular video
signals, set to "VIDEO".
S-VIDEO: If a connected appliance's input is
compatible with Y/C signals, set to
"S-VIDEO". You can obtain a high-
quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
E
Return to the normal screen.
Press SET UP MENU.
NOTES:
● For setting the DVD output of the L-1 IN/OUT connector, refer
to page 9.
● It is not possible to set the input mode for the L-1 IN/OUT
connector. The input for this connector is only compatible
with the composite signal.