Table of Contents
Advertisement
22
EN
Recording Features
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
Record One Programme While
Watching Another
If your unit is connected to the TV via the AV connection,
press TV/VCR. The unit's VCR indicator and the TV
broadcast being recorded disappear. Once recording is in
progress, all you need to do is to set the channel controls
on the TV for the station you wish to view.
● The programme selected with the TV's channel controls
appears on the TV screen, while the one selected with the
unit's PR buttons is recorded on the tape.
● If a decoder is connected to the unit (
select a scrambled channel as well with the TV channel
controls.
NOTE:
You can also use the DVD deck in the following cases. Before
use, be sure to turn on the unit and select the DVD deck.
● During recording
● During timer recording
● During timer standby mode
Instant Timer Recording (ITR)
This easy method lets you record for
from 30 minutes to 6 hours (selectable in
30-min. increments), and shuts the unit
off after recording is finished.
1
Start recording.
Press 7 on the unit.
2
Engage the ITR mode.
Press 7 again. " " blinks and "0:30" appears on the
front display panel.
3
If you want to record for more than 30 minutes, press 7
to extend the time. Each press extends recording time by
30 minutes.
NOTES:
● You can only perform ITR using the 7 button on the unit's
● Still picture playback stops automatically after 5 minutes to
● When the end of the tape is reached during timer recording,
● When the end of the tape is reached during timer recording or
● During Instant Timer Recording, any other timer programmed
Elapsed Recording Time Indication
1
Press – –:– – until a counter reading appears on the front
display panel.
2
Press 0000 before starting recording or playback.
● The counter is reset to "0:00:00" and shows the exact elapsed
Tape Remaining Time
Press – –:– – until the time remaining on the tape
appears.
● The front display panel shows the tape remaining time with
pg. 63), you can
● By pressing the – –:– – button, you can change the display to
NOTES:
● When you press – –:– –, the on-screen display appears on the
● Depending on the type of tape being used, the tape remaining
OPERATIONS ON S-VHS DECK (cont.)
Set the recording duration.
front panel.
protect the heads.
the unit stops and "
" and "$" blink on the front display
panel.
Instant Timer Recording, the unit is turned off and "
"$" blink on the front display panel.
recording won't start even if their start time has come. In such
a case, the timer programmed recording starts (if the end time
of the timer programmed recording is set after the end of
Instant Timer Recording) after the Instant Timer Recording
finishes.
Set the counter display.
Reset the counter.
time as the tape runs. You can check the exact time of a
recording or playback.
"z" displayed.
show the clock time, counter reading or tape remaining time.
TV screen for 5 seconds, then the displays other than the
counter disappears. To clear the counter display, press – –:– –.
time reading may not appear right away, or is not correct.
"– –:– –" may sometimes appear, or the display may blink on
occasion.
" and
Advertisement
Table of Contents
