Table of Contents
Advertisement
54
EN
Edit From A Camcorder
You can use a camcorder as the source player and your
unit as the recording deck.
Slide the TV/VCR/DVD switch to the right.
A If the camcorder has no S-VIDEO output connector:
Recorder
AUDIO input
Audio cable (not provided)
Video cable (not provided)
VIDEO input
VIDEO OUT
AUDIO OUT
EDIT
Player
B If the camcorder has an S-VIDEO output connector:
Recorder
AUDIO input
Audio cable (not provided)
S-Video cable (not provided)
S-VIDEO input
S-VIDEO OUT
AUDIO OUT
EDIT
Player
A
A If the camcorder has no S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and VIDEO
OUT connectors to the unit's front panel AUDIO and
VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and
S-VIDEO OUT connectors to the unit's front panel
AUDIO and S-VIDEO input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
● When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the unit. Refer to the
camcorder's instruction manual for operating procedure.
To PAUSE
connector
B
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
Mini-plug cable
(not provided)
lights up.
(JVC camcorder
On the remote control
only)
Press VCR so that the VCR indicator lights up.
C
Press AUX (number key "0") and/or PR to select "F-1" for
the AUDIO and VIDEO input connectors, or "S-1" for the
AUDIO and S-VIDEO input connectors, depending on
the connectors being used.
D
See "PICTURE CONTROL" on page 65.
E
Use 4, 3, or 5 to locate the point where you start
To PAUSE
recording, then press and hold 9 and press 7 to engage
connector
the Record Pause mode.
F
Engage the Play mode of the camcorder.
Mini-plug cable
(not provided)
G
(JVC camcorder
only)
Press 4 to engage the Record mode of the unit.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select "EDIT" to dub tapes in step D, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
EDITING (S-VHS DECK)
Make connections.
Select the S-VHS deck.
Set the unit's input mode.
Set the edit mode.
Engage the Record Pause mode.
Start the camcorder.
Start the unit.
Advertisement
Table of Contents
