Section One; Setting Up Your Lifebooke Series From Fujitsu - Fujitsu Lifebook E360 Manual

S e c t i o n O n e

SECTION ONE

SETTING UP YOUR LIFEBOOK
E SERIES FROM FUJITSU
This section describes how to set up your
LifeBook E Series from Fujitsu. We strongly
recommend that you read it before using your
notebook – even if you are already familiar with
notebook computers.
UNPACKING
When you receive your notebook, unpack it
carefully, and compare the parts you have
received with the items listed below and with
your packing label.
You will have some or all of the following.
Please check your packing sheet or the
appendix for your model.
LifeBook E Series from Fujitsu.
(Figure 1-1.)
AC adapter with AC power cord (located in
the accessories box). (Figure 1-2.)
2
Modular Lithium ion battery. (Already
installed in Multi-function Bay 1 of
your notebook.)
Modular 24x maximum CD-ROM drive.
(Already installed in Multi-function Bay 2
of your notebook.)
Battery adapter for Multi-function Bay 2
(located in the accessories box.) (Figure 1-3.)
Modular 3.5" floppy disk drive (located in the
accessories box). (Figure 1-4.)
Modular Zip drive (located in the accessories
box). (Figure 1-6.) (Available on some configu-
rations, see appendices for details.)
Weight Saver for Multi-function Bay 2
(located in the accessories box.)(Figure 1-5.)
Modem (RJ-11) cable (located in the
accessories box).
Getting Started Guide and User's Guide.
Microsoft Windows 98 SE or
Windows NT 4.0 Manual.
Figure 1-1 LifeBook E Series Notebook
Figure 1-2 AC Adapter Unit
Registration card and customer
information pack.
Recovery CD-ROM
(located in the accessories box).