Table of Contents
Advertisement
RUGGEDCOM WIN7225
Installation Guide
• EN 60950-22
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
• EN 61850-3
Communication Networks and Systems for Power Utility Automation – Part 3: General Requirements
• EN 301 489-4 (v1.3.1)
Electromagnetic Compatibility and Radio Spectrum Matters (ERM) – Electromagnetic Compatibility (EMC)
Standard for Radio Equipment and Services – Part 4: Specific Conditions for Fixed Radio Links, Broadband Data
Transmission System Base Stations, Ancillary Equipment and Services
• EN 302 544-2 (v1.1.2)
Broadband Data Transmission Systems Operating in the 2500 MHz to 2690 MHz Frequency Band – Part 2: TDD
User Equipment Stations – Harmonized EN covering the essential requirements of article 3.2 of the R&TTE
Directive
The device is marked with a CE marking and can be used throughout the European community.
A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to
"Contacting
Siemens".
Section 5.1.4
TÜV Rheinland
This base station is certified by TÜV Rheinland to meet the requirements of the following standards:
• UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
• UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The base station is marked with a TÜV Rheinland marking and can be used throughout the European community.
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to
Section 5.1.5
FCC
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
TÜV Rheinland
"Contacting
Siemens".
Chapter 5
Certification
37
Advertisement
Table of Contents
