Table of Contents
Advertisement
RUGGEDCOM WIN7014
Installation Guide
• EN 60950-22
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
• EN 61850-3
Communication Networks and Systems for Power Utility Automation – Part 3: General Requirements
Section 5.1.4
TÜV Rheinland
This base station is certified by TÜV Rheinland to meet the requirements of the following standards:
• UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
• UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The base station is marked with a TÜV Rheinland marking and can be used throughout the European community.
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to
Section 5.1.5
Other Approvals
This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
• IEC 61850-3
General Requirements
• IEC 870-2-2
Telecontrol Equipment and Systems – Part 2: Operating Conditions – Section 2: Environmental Conditions
(Climatic, Mechanical and Other Non-Electrical Influences)
• MIL-STD-810F
Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory
Tests – Method 509.4 (Salt Fog)
TÜV Rheinland
"Contacting
Siemens".
Chapter 5
Certification
37
Advertisement
Table of Contents
