Table of Contents
Advertisement
RUGGEDCOM WIN7018
Installation Guide
• EN 60950-22
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
• EN 61850-3
Communication Networks and Systems for Power Utility Automation – Part 3: General Requirements
Section 5.1.4
TÜV Rheinland
This base station is certified by TÜV Rheinland to meet the requirements of the following standards:
• UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
• UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The base station is marked with a TÜV Rheinland marking and can be used throughout the European community.
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to
Section 5.1.5
ISED
This base station is declared by Siemens Canada Ltd to meet the requirements of the following ISED (Innovation
Science and Economic Development Canada) standard:
• SRSP 301.7 Issue 24
Technical Requirements for Fixed Radio Systems Operating in the Bands 1700-1710 MHz and 1780-1850 MHz
Section 5.1.6
Other Approvals
This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
• IEC 61850-3
General Requirements
• IEC 870-2-2
Telecontrol Equipment and Systems – Part 2: Operating Conditions – Section 2: Environmental Conditions
(Climatic, Mechanical and Other Non-Electrical Influences)
TÜV Rheinland
"Contacting
Siemens".
Chapter 5
Certification
35
Advertisement
Table of Contents
