The Printer Does Not Print; The Dvd Film Does Not Continue To Play; Acoustic Warnings; System Configuration Contains Invalid Data - Fujitsu Siemens Computers AMILO A1650G Operating Manual

The printer does not print

Ê
Make sure that the printer is switched on and is on-line (see the manuals supplied with the
printer).
Ê
Check that the cable connecting the notebook and the printer is connected properly.
Ê
Check that the correct printer driver is installed.
Ê
Check in the BIOS Setup whether the Onboard Devices Configuration field is set correctly for the
port you are using.

The DVD film does not continue to play

Should the picture freeze when playing some DVD films, deactivate the accelerated hardware
decryption (it is activated in the default setting; this can be recognised from the checkmark in the
corresponding checkbox).
Ê
Open the drive tray.
Ê
Place the DVD in the drive tray with the label facing upwards.
Ê
Push in the drive tray until you feel it lock into place.
Ê
Wait until the WinDVD starts.
Ê
Press the right mouse button or touchpad key.
A context menu appears.
Ê
Click on Configuration and then on Video.
Ê
Click on the checkmark in the checkbox of Hardware Acceleration.
The checkmark disappears.
Ê
Click on OK.
The function is now deactivated.

Acoustic warnings

A beep sounds approx. every 15 seconds.
The battery is almost flat.
Ê
Charge the battery.

System configuration contains invalid data

Ê
Switch the notebook off.
Ê
Switch the notebook on.
Ê
Enter the BIOS Setup programme by pressing [F2].
Ê
Select the default values under Load Default Settings.
Ê
Mark Yes in the Do you want to load default settings? dialogue box.
Ê
Press the Enter key.
SAP:10600366086
Troubleshooting and tips
55