Settings In Bios Setup; Start Bios Setup - Fujitsu Siemens Computers AMILO A1650G Operating Manual

Settings in BIOS Setup

In BIOS Setup you can set the system functions and the hardware configuration of the notebook. The
settings can only be changed via the keyboard.
When it is delivered, the notebook is set to factory default settings. You can change these settings
in BIOS Setup. Any changes you make take effect as soon as you save and quit the BIOS Setup.
The BIOS Setup programme contains the following menus:
Main: for system settings as time, date, hard disk and monitor selection
for system settings such as ports and keyboard
Advanced:
Security: for password settings and safety functions
for setting the energy saving functions
Power:
for configuring the boot sequence
Boot:
Exit: to exit the BIOS Setup

Start BIOS Setup

Ê
Restart the notebook (switching ON/OFF or warm boot).
The following or a similar display appears on the screen during booting:
<ESC> Boot Menu
from LAN
Ê
When this message appears, press the key [F2].
If a password has been assigned:
i
Ê
Enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator or contact our
hotline/help desk.
SAP:10600366086
<F2> BIOS Setup <F6> Battery Learning <F12> Boot
49