Fujitsu 420D User Manual page 121

Problem
Time and Date as shown in Windows 95
is not changing.
The Suspend/Resume Button does not work.
You have installed an external keyboard or
mouse,and it does not seem to work.
T r o u b l e s h o o t i n g
Possible Cause
1. Windows 95 Power Management setting is
turning o the clock.
1. The Suspend/Resume Button is disabled
from the Power Savings Menu of the Setup
Utility.
2. You did not hold the button in long enough.
3. There may be a conflict with the application
software.
1. The external device is not properly installed.
2. The operating system software is not setup
with the correct software driver for that device.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
Possible Solution
1. Open the Power Control Panel and set Power
Management to Advanced.
1. Enable the button from the Power Savings
Menu of the Setup Utility. (See pages 67-69.)
2. Hold the button until you hear the acknowl-
edge beep. This can be a very long time if the
application is preventing the CPU from check-
ing for button pushes.
3 . Close all app l i c a ti on s , and try the But ton aga i n .
1. Re-install the device. (See Installing a Mouse
or Keyboard on page 86.)
2. Check the device and operating system docu-
mentation and activate the proper driver.
101