Fujitsu 420D User Manual page 61

Head: Sets the number of heads on the hard
disk drive. This is a number between 1 and 16
which can be set by incrementing or typing
in the number.
Sectors/Track: Sets the number of sectors on the
hard disk. This is a number between 0 and 63
which can be set by incrementing or typing
in the number.
Write Precomp: Sets the amount of write com-
pression to be used in storing data on the hard
disk. This is None or a number up to four digits
which can be set by incrementing or typing
in the number.
Multi-Sector Transfers: Sets the number of sec-
tors allowed in a block transfer. This is Disabled
or 2,4,6,8 or 16 sectors.
LBA Mode Control: Enables or disables Block
Addressing in place of Cylinder, Head, Sector
addressing.
Transfer Mode: Selects the data movement
method for the hard disk. The options are
C o n f i g u r i n g Y o u r L i f e B o o k 4 0 0 S e r i e s
Standard or Fast PIO 1 - Fast PIO 4.
This parameter is not controlled by the selec-
tion made for Type:
32 Bit I/O: This allows you to enable or disable
32 bit data transfers.
Enabling Memory Cache:
The Memory Cache Field lets you enable or dis -
able the memory cache feature. The options are
Enabled or Disabled. The default is Enabled.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
53