IKEA LAGAN Manual page 20

ENGLISH
results. It removes limescale and grease
buildup.
When the appliance senses the need for
cleaning, the indicator
Machine Care programme to clean the
appliance interior.
How to start the Machine Care
programme
Before starting the Machine Care
programme, clean the filters and
spray arms.
1. Use a descaler or a cleaning product
designed specifically for dishwashers.
Follow the instructions on the packaging.
Do not put dishes in the baskets.
2. Press and hold simultaneously
for about 3 seconds.
The indicators and
3. Close the appliance door to start the
programme.
When the programme is complete, the
indicator is off.
Internal cleaning
• Carefully clean the appliance, including
the rubber gasket of the door, with a soft
damp cloth.
• Do not use abrasive products, abrasive
cleaning pads, sharp tools, strong
chemicals, scourer or solvents.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers at
least once every two months. Carefully
follow the instructions on the packaging
of the product.
• For optimal cleaning results, start the
Machine Care programme.
External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.
is on. Start the
and
flash.
Cleaning the filters
1
Make sure that there
are no residues of
food or soil in or
around the edge of
the sump.
3
To remove filters (B)
and (C), turn the
handle
counterclockwise
and pull it upwards.
Remove the filter (C)
out of filter (B).
Wash the filters with
water.
2
C
B
A
The filter system is
made of three parts.
4
Remove the flat filter
(A). Wash the filter
with water.
20