Auto Power Off Setting - FujiFilm FINEPIX S602 ZOOM Owner's Manual

AUTO POWER OFF SETTING

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＩＭＡＧＥ ＤＩＳＰＬＡＹ
ＡＦ ＭＯＤＥ ＡＦ ＭＯＤＥ
ＳＥＴ ＡＤＡＰＴＥＲ ＲＩＮＧ ＳＥＴ ＡＤＡＰＴＥＲ ＲＩＮＧ
ＡＵＴＯ ＰＯＷＥＲ ＯＦＦ ＡＵＴＯ ＰＯＷＥＲ ＯＦＦ
Sleep does not function in set-up or playback mode, but the camera automatically switches off
if the camera is not used for a set time (2 minutes or 5 minutes).
Switching the Camera Back On
1 0
0 2
When this function is enabled, the screen
temporarily switches off (sleeps) to save power if
the camera is not used for approx. 30 seconds.
ＳＥＴ ＳＥＴ
ＳＥＴ ＳＥＴ
If the camera remains unused for an additional
ＯＦＦ ＯＦＦ
interval (2 minutes or 5 minutes), it is
ＡＦ ＡＦ
automatically switched off. Use this function
ＮＯ ＮＯ
２ ＭＩＮ ＭＩＮ
when you want to get the maximum possible
running time from your batteries.
!
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera
up so that it is ready to take pictures. This is a
useful feature as it allows you to take pictures
more quickly than switching the camera off and
then on again.
!
1Set the Power switch to OFF.
2Set the Power switch to "
Auto Power Off is disabled when the camera is
connected via the USB connection.
You can wake the camera up by pressing any other
button as well as the shutter button.
" or " ".
5
73