FujiFilm FINEPIX S602 ZOOM Owner's Manual page 65

3
ＤＰＯＦ ＤＰＯＦ
1 0
4
1 0
ＤＰＯＦ ＤＰＯＦ
ＴＯＴＡＬ／００９ ＴＯＴＡＬ／００９
ＳＥＴ ＳＥＴ
ＲＥＳＥＴ ＲＥＳＥＴ
ＦＲＡＭＥ ＦＲＡＭＥ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ
5
DPOF Settings Cannot be Modified
ＲＥＳＥＴ ＤＰＯＦ ＯＫ？ ＲＥＳＥＴ ＤＰＯＦ ＯＫ？
ＯＫ ＯＫ
ＤＡＴＥ ＯＮ ＤＡＴＥ ＯＮ
ＤＡＴＥ ＯＦＦ ＤＡＴＥ ＯＦＦ
2 0
0 2
１００−００１１ １００−００１１
ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
If you select a frame for which DPOF settings have
already been specified, the "
１００−００１１ １００−００１１
appears.
Pressing the "MENU/OK" button erases all the DPOF
settings already specified. You must then specify the
DPOF settings again.
!
Press the "BACK" button to leave the previous settings
unchanged.
ＢＡＣＫ ＢＡＣＫ
!
During playback, check that the "
previous settings.
1Use "a " and "b " to select "DATE ON" or
"DATE OFF".
2Press the "MENU/OK" button.
The selected setting is then valid for all frames
with DPOF settings.
1Use "d" or "c" to display the frame for which
you want to specify DPOF settings.
2Use "a" or "b" to select the setting for the
frame to be printed.
To specify more DPOF settings, repeat steps 1
and 2.
Do not press the "MENU/OK" button until you
have finished specifying all the DPOF settings
for your images.
!
Prints cannot be ordered for movies (video).
!
"TOTAL" shows the total number of frames for which
prints have been ordered.
When you have finished specifying the DPOF
settings, always press the "MENU/OK" button to
confirm the settings.
If you press the "BACK" button, no DPOF settings
are specified.
!
The number of prints that can be specified is one per
each frame.
Also, the maximum number of frames for which DPOF
settings can be specified on the same media is 999.
Pressing the "MENU/OK" button confirms all the
settings.
" message
" icon is displayed for the
4
65