On-Screen Numeric Keypad
Tap the "x" in the text field to clear any previous entry. Use the keypad to make the new
entry. Tap
to delete the last digit. Tap Save to save the new entry or
to
return to the Ethernet Setup - Static IPs screen.
After new settings have been saved, tap Reboot on the Ethernet Setup - Static IPs screen
to reboot the DGE so that the new settings can take effect.
If not making any changes, tap
to return to the Ethernet Setup screen.
Tap
again to return to the main setup screen.
IP Table Setup
On the main setup screen, tap IP Table Setup to display the Ethernet Setup - IP Table
screen.
Ethernet Setup - IP Table Screen
The Ethernet Setup - IP Table screen displays up to four IP table settings, each of which
has an Online indicator. To add or edit an entry, tap the Add/Edit button to its left. The
Ethernet Setup - Edit IP Table Entry screen is displayed.
DGE-100/DM-DGE-200-C: Digital Graphics Engines • 3
Supplemental Guide – DOC. 7696B