Access The Setup Screens - Crestron DGE-100 Supplemental Manual

DGE-100/DM-DGE-200-C:
Digital Graphics Engines

Access the Setup Screens

The setup screens enable basic configuration prior to regular operation of the Crestron
DGE-100 and DM-DGE-200-C.
The DGE-100 and DM-DGE-200-C are functionally similar. For simplicity within this guide,
the term "DGE" is used except where noted.
During regular operation of the DGE, there are two ways to access the setup screens:
1. Place a button on the project main page and assign the reserved join number
2. Press the SETUP button on the DGE.
The main setup screen is displayed.
Setup Screen
The setup screen is composed of buttons for Ethernet setup, IP table setup, audio setup,
standby timeout, and diagnostics. In addition, there is a button to toggle system messages
on or off, an About button that provides information about the touch screen, and a Save &
Exit button. The functions of each are detailed in the following pages of this guide.
Supplemental Guide – DOC. 7696B
(17242) that accesses the setup screens.
DGE-100/DM-DGE-200-C: Digital Graphics Engines • 1
®