Inserting Or Replacing The Batteries; Declaration Of Conformity - Alcatel TEMPORIS 500 User Manual

Hide thumbs Also See for TEMPORIS 500:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
Page
9

2.4 INSERTING OR REPLACING THE BATTERIES

Your phone uses 4 LRO3-AAA 1.5V alkaline batteries (not included).
Insert or replace the batteries as described below:
For safety reasons, always unplug the telephone line first.
Open the battery compartment on the bottom of the base. Push down hard on the
door while sliding it back.
Remove the used batteries and insert the new ones. Pay attention to the '+' and '-'
polarity indicated in the battery compartmentt.
Close the battery compartment and re-connect the telephone set.
Batteries will last for approximately 6 months under normal conditions of use.
When the batteries are drained, the battery icon
You must then replace them with a fresh batteries as soon as possible.
NOTE: Your TEMPORIS 500 still work properly without batteries or with
empty batteries. However if you disconnect it from the telephone line, it
will lose information like the date and time and directory records
except the content of the one-touch memories.

2.5 DECLARATION OF CONFORMITY

The TEMPORIS 500 is certified in accordance with European regulations, as
indicated by the CE marking.
The TEMPORIS 500 is intended to transmit and receive telephone calls and for
connection behind a private branch exchange (PBX) or a public network of the
European community.
It is designed for connection to a TRT3 class (telecommunications network vol-
tage) analogue telephone line, as defined in the EN60950-1 standard.
Thomson Telecom hereby declares that the TEMPORIS 500 conforms to the
essential requirements and other relevant provisions of directive 1999/5/CE.
will start flashing.
8

Advertisement

Table of Contents
loading

Table of Contents