Using Gps; Displaying Tracked Movement Of Gps Logs - Olympus TG-6 Instruction Manual

 Updating the A-GPS data using a smartphone
Before update, install the smartphone app "OLYMPUS Image Track" (OI.Track) on your
smartphone. Refer to the URL below for details on how to update the A-GPS data.
http://app.olympus-imaging.com/oitrack/
Connect the camera and the smartphone, following the procedure described in
"Adjusting Settings for Connection to a Smartphone" (P. 107). Select [Update GPS
Assist Data] in the OI.Track settings dialog.
• If a connection error is displayed, you will need to re-establish the connection between the
camera and smartphone.
 Updating the A-GPS data using a PC
Download the OLYMPUS A-GPS Utility software from the URL below, and install it on
your PC.
http://sdl.olympus-imaging.com/agps/
Refer to "OLYMPUS A-GPS Utility Instruction Manual" on the website with above URL
for details on how to update the data.
• If you are using the GPS function for the fi rst time and the A-GPS has not been updated,
6
or if the function has not been used for a long time, it may take a few minutes for the
position measurement to end.

Using GPS

Any of the following enable GPS:
rotating the LOG switch to LOG (P. 113), selecting [On] for [Record GPS location]
(P. 100), or selecting [On] for [X Settings] > [Auto Time Adjust] (P. 94).
• Do not cover the GPS antenna with your hands or metal objects.
• If you are using the GPS function for the fi rst time and the A-GPS has not been updated,
or if the function has not been used for a long time, it may take a few minutes for the
position measurement to end.
• Enabling GPS increases the drain on the battery. To reduce the drain on the battery when
GPS is enabled, select [Battery power] for [GPS Priority] (P. 100).

Displaying tracked movement of GPS logs

After the GPS track logs are recorded, the tracked movement of the logs can be
displayed using the OI.Track.
• The tracked movement cannot be displayed on the camera.
112 EN