Olympus TG-6 Instruction Manual page 135

Monitor indication
The current log has not been
saved to the card.
The current log cannot be saved
to the card.
• Each card can store up to 199
h
There is a problem with the card. Insert a new card.
(blinks)
Writing to the card is prohibited.
There is no space in the card
and print reservation or new
images cannot be recorded.
The area of camera memory
used for temporary storage of
the log fi le is full.
The battery is exhausted.
The camera is connected to a
television or other device via an
HDMI cable.
g
Wireless data transfer is in
(steady)
progress.
The USB-AC adapter is being
used to supply power to the
camera from an electrical outlet
while the battery is removed.
The clock is not set.
g
GPS malfunction.
(red)
Possible cause
log fi les.
Corrective action
Insert the card correctly and save
the log to the card.
Copy log fi les to a computer and
delete them from the card.
The card write-protect switch is set
to the "LOCK" side. Release the
switch. (P. 15)
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
Insert a card or confi rm that the
current card is correctly inserted
and transfer to log fi le to the card.
Charge the battery.
Disconnect the HDMI cable.
End transfer.
Insert the battery and unplug the
USB-AC adapter from the outlet.
Set the clock and select a time
zone.
Turn the camera off and then on
again; if the message does not
clear from the display, contact an
OLYMPUS service representative.
9
EN 135