Olympus TG-6 Instruction Manual page 43

2
Highlight an option using HI or the control dial.
o Single
Sequential
T
High
Sequential
S
Low
Y12s Y 12 sec
Y2s Y 2 sec
Custom
YC
Self-timer
J
Pro Capture
3
Press the Q button.
• Fix the camera securely on a tripod for self-timer shooting.
• If you stand in front of the camera to press the shutter button when using the self-timer,
the picture may be out of focus.
• When you are using S, live view is displayed. In T, the display shows the last
photograph taken during the sequential shooting.
• During sequential shooting, if the battery level icon blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
$
Notes
• To cancel the activated self-timer, press the MENU button.
• Self timer is not canceled automatically after shooting.
1 frame is taken at a time when the shutter button is pressed.
Hold the shutter-release button all the way down to take a series of
photographs.
• To select a frame advance rate, highlight [Sequential High]
and press the INFO button before you press the Q button.
Select from frame advance rates of approximately 10 frames
per second (10 fps) or 20 frames per second (20 fps). Use
FGHI or the control dial to highlight a frame advance rate
and press the Q button to select.
• The fl ash is disabled.
Pictures will be taken at about 5 fps while the shutter button is
pressed all the way down.
Press the shutter button halfway to focus, all the way down to start
the timer. First, the self-timer lamp lights up for approximately 10
seconds, then it blinks for approximately 2 seconds and the picture
is taken.
Press the shutter button halfway to focus, all the way down to start
the timer. The self-timer lamp blinks for approximately 2 seconds,
and then the picture is taken.
Press the INFO button to set [Y Timer], [Number of Frames], and
[Interval Length].
Use HI to highlight items and FG to select a value.
Focus, exposure, and white balance are fi xed at the values for the
fi rst shot in each series.
Sequential shooting begins when you press the shutter button
halfway. Press the shutter button all the way down to begin
recording captured images to the card, including those for a
halfway press. Focus, exposure, and white balance are fi xed at the
values for the fi rst shot in each series. g "Pro Capture" (P. 44)
• The fl ash is disabled.
2
EN 43