Table of Contents
Advertisement
6) Go to Wireless Security page and set the wireless security settings exactly as they
are on the link partner (Router 1).
7) Go to DHCP Server to disable the DHCP on Router 2. Now you have finished all
settings on Router 2 required for WDS.
2. Configure Router 1:
1) Go to wireless section on Router 1 and specify WDS (or WDS Bridge)
as its wireless working mode.
2) Manually enter Router 2's MAC address (Also, you can use the Scan
option as mentioned above) and click OK to finish your settings.
Wireless N300 Home Router
40
Advertisement
Table of Contents
