Table of Contents
Advertisement
4.
Channel: The channel used by the uplink wireless device.
5.
Security Mode: The security mode used by the uplink wireless device.
6.
WPA Algorithms (or Cipher Type): The WPA Algorithm (or Cipher
Type) used by the uplink wireless device.
7.
Key (or Security Key): The security key used by the uplink wireless
device.
8.
OK: Click this button and the router will restart to save your settings.
Note: If you change the device's LAN IP address, you must use the new
one to log on to the web-based configuration utility.
For example:
If SSID, security mode, cipher type (WPA Algorithm), security key and
channel your WISP AP are respectively Myhome, WPA2-PSK，AES,
Tenda_router and 11, then simply enter them in corresponding fields as
seen below.
Or you can use the Open Scan (or Scan) option to have the SSID and
channel of the uplink wireless device automatically copied to this page.
When you finish all these settings, go to Advanced-> Internet
Connection Setup and select a proper Internet connection type (If your
ISP is using a DHCP connection, simply select DHCP).
Wireless N300 Home Router
29
Advertisement
Table of Contents
