Cross-Lane Communication Systems; Talk Lock Mode ("Hands Free") - 3M C960SL Operating Instructions Manual

Model C960SL
System Operation
Talk Lock Mode
("Hands Free")
 3M 2003

Cross-Lane Communication Systems

Communication During Peak Hours
During peak hours, the cross-lane module is turned off and the system
functions like a dual-lane duplex system. Some transceiver packs are
programmed to communicate with Lane 1 and others are programmed to
communicate with Lane 2.
Communication During Off-Peak Hours
During off-peak hours, the cross-lane module is turned on to enable a single
operator to communicate with customers in either lane (1or 2).
1. An alert tone sounds in the compact earset when the system detects a
customer (vehicle) at the menu sign:
• The alert tone for Lane 1 transceiver packs is a single beep that repeats
at 2-second intervals.
• The alert tone for Lane 2 transceiver packs is a double beep that repeats
at 2-second intervals.
2. When you hear the single beep alert tone, press and hold T1 and talk to the
customer at menu sign 1. Release T1 to listen.
When you hear the double beep alert tone, press and hold T2 to talk to the
customer at the menu sign 2. Release T2 to listen.
Use this mode to operate "hands free". The talk lock mode is only available
with duplex system configurations.
In this mode, the transceiver pack automatically switches from standby to
talk/listen when a customer is detected. The transceiver pack automatically
switches back to standby when the customer leaves.
"Hands Free" operation (talk lock mode) prevents all other compact earset
operators from communicating.
To use the talk lock mode, press the talk lock switch on the transceiver pack.
To return to normal operation, press T1 or P.
Note
9