TYAN S7103 Manual page 52

Table of Contents

Advertisement

3.3.1.1.1 MAC 34:12:78:56:00:00
iSCSI Mode
Disabled, Enabled, Enabled for MPIO.
Disabled / Enabled / Enabled for MPIO
Internet Protocol
Initiator IP address is system assigned in IP6 mode. In Autoconfigure mode, iSCSI
driver will attempt to connect iSCSI target via IPv4 stack, if failed then attempt IPv6
stack.
IP4 / IP6 / Autoconfigure
Connection Retry Count
The minimum value is 0 and the maximum is 16. 0 means no retry.
Connection Establishing Timeout
The timeout value in milliseconds. The minimum value is 100 milliseconds and the
maximum is 20 seconds.
52
http://www.tyan.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

S7103gm2nrS7103gm4nr-2f-l2

Table of Contents