TYAN S7103 Manual page 80

3.3.12 Network Stack Configuration
NOTE: The BIOS will automatically read the onboard LAN controller.
Network Stack
Enable/Disable UEFI Network Stack.
Enabled / Disabled
When Network Stack is set to [Enabled]
Ipv4 PXE Support
Enable Ipv4 PXE Boot Support. If disabled IPV$ PXE boot option will not be created.
Disabled / Enabled
Ipv4 HTTP Support
Enable Ipv4 HTTP Boot Support. If disabled IPV4 HTTP boot option will not be
created.
Disabled / Enabled
Ipv6 PXE Support
Enable Ipv6 PXE Boot Support. If disabled IPV6 PXE boot option will not be created.
Disabled / Enabled
80
http://www.tyan.com